EmStat3 MUX8 (ES3-MUX8)

EmStatMUX8 and EmStatMUX16: USB powered potentiostat with integrated multiplexer



Product Description

The EmStat can be combined with two types of multiplexers as one integrated instrument to perform measurements with multiple electrode systems. With the MUX8 connecting arrays or other setups made of up to eight working electrodes in two or three electrode cell types is possible.

The reference and counter electrodes can be shared or separated. The MUX16 is suitable for sensor arrays or other setups with sixteen working electrodes but only in 2 electrode cell types. The combined counter and reference electrode can be shared by all working electrodes or each working electrode has a corresponding combined reference and working electrode.

The potentiostat is controlled as well as powered by USB and is used with PSTrace. The MUX can sample different cells at a rate of 25 ms/cell. Usually a method needs to be finished to switch the cell but the fast sampling per cell makes it possible to measure time depending techniques, e.g. chronoamperometry, practically simultaneous. Via the script window of PSTrace it is also possible to perform a different experiment with each of the channels.

To make it easier for you decide, if  a multiplexer or a multichannel device is more suitable for your application, we have created a short explanation of multiplexers, multichannels and polypotentiostats.


Standard packaging includes a stripped end, Dsub-37 high density cable and a USB cable. A more convenient connection to your setup can be done via the optional Connection Terminal. We provide either a PCb with screw terminals or pre-equipped shielded cables with 2 mm banana plugs. The Connection Terminal can be directly joined to the EmStatMUX via their D-Sub connectors.


Software for Windows and Android

Our standard software for all single channel instruments PSTrace  comes standard on a CD and available to download. For controlling PalmSens3 using a phone or tablet download PStouch for Android. It is available for free in the Google Play store.



The following techniques are supported by EmStatMUX.

Voltammetric techniques:

  • Linear sweep voltammetry (LSV)
  • Differential pulse voltammetry (DPV)
  • Square wave voltammetry (SWV)
  • Normal pulse voltammetry (NPV)
  • Cyclic voltammetry (CV)

These methods can all be used in their stripping modes which are applied for (ultra-) trace analysis.

Techniques as a function of time:

  • Chronoamperometry (CA)
  • Pulsed amperometric detection (PAD)
  • Multiple pulse amperometry (MPAD)
  • Open circuit potentiometry (OCP)
  • Multistep amperometry (MA)


EmStatMUX 8

The EmStatMUX8, a combined EmStat3 potentiostat with an 8 channel multiplexer, can be connected to 8 electrochemical cells or sensors. This multiplexer can be used with different electrode or sensor configurations:

  1. Eight separate cell or sensors each with a working, reference and counter electrode,
  2. Eight separate cell or sensors each with a working and combined reference and counter electrode,
  3. Cell or sensor array with eight working electrodes sharing a reference and a counter electrode,
  4. Cell or sensor array with eight working electrodes sharing a combined reference/counter electrode.

In all configurations the sensors can be multiplexed, leaving the not-selected electrodes or sensors at open circuit. Configurations 2, 3 and 4 also have the possibility to apply the specified potential to all electrodes or sensors continuously. The multiplexers is supported by the PSTrace software and provide the possibility to select a channel and to start a measurement using the selected channel or measuring all channels consecutively. In amperometric mode all 8 channels can be measured simultaneously, yielding up to 8 curves in a single measurement.

We dispatch worldwide

For purchases that exceeds $100