spray dryer is a kind of continuous atmospheric dryer. Use pneumatic or electric atomization device to make liquid high-speed centrifugal spray as fog droplet, make these fog droplet contact with the hot air in the drying chamber and instantaneous drying.
Parameters
Name |
OLT-SD10L |
Inlet air temperature control |
≤30-300 °C. |
Outlet air temperature control |
<30 ~ 150 °C. |
Maximum evaporation of water |
200ml-10L/h. |
Centrifugal spray head transmission form |
Electric. |
Speed |
40,000 rpm |
Spray disc diameter |
80mm |
Heat source |
Electricity |
Electric heating maximum power |
18kw |
Total power |
22kw |
Dimensions L*W*H(mm) |
2500*1600*2800 |
Dry powder recovery |
≥98% |
Configuration List
S.N. | Name | Specification | Material | Quantity |
1 | OLT-SD10L spray dryer | 2500*1600*2800 | Stainless steel | 1 |
2 | Tower body | Φ1400*2600 | Stainless steel | 1 |
3 | Centrifugal nozzle atomizer | Φ80 10kg per hour | Stainless steel | 1 |
4 | Air compressor / vibrating air hammer | Matching | Stainless steel | 2 |
5 | Cyclone separator | Φ300 | Stainless steel | 1 |
6 | Peristaltic pump | 30-100L/h-0.55kw | Stainless steel | 1 |
7 | Induced draft fan | 4kw | Q235A steel | 1 |
8 | Electric heaters | 18kw | Stainless steel | 1 |
9 | air filter | Matching | Sainless steel | 1 |
10 | Electrical control box | PLC | Stainless steel | 1 |
11 | Inlet and out wind temperature detector | Matching | Stainless steel | 2 |
12 | Air duct | Matching | Stainless steel | 1 |
13 | Receiving cylinder | 10L | stainless steel | 1 |
14 | Cylinder insulation | 50mm | Insulation cotton | |
15 | support | 60*60mm | Stainless steel | 1 |
Air through filtering and heating, enter the hot air distributor which is at the top of spray dryer, hot air spiraling evenly into the drying chamber. Liquid through the high-speed centrifugal automizer which is at the top of drying chamber, (rotating) centrifugal spray into tiny fog droplet, then contact with the hot air flow, drying finish product in a very short time and whereabouts. Finished product output continuously between the drying tower bottom and cyclone separator, exhaust through dust catcher emptying by induced draft fan.
Detail Images