The solar simulator is used to simulate the real conditions of sunlight and is widely used in the quality research and inspection of solar photovoltaic devices.
The solar simulator has characteristics such as beam collimation, uniform focal point and spectral correspondence with sunlight. It allows the performance of experiments that require solar irradiation conditions. It is suitable for monocrystalline silicon, polycrystalline silicon, amorphous films, dye sensitization, organic materials and semiconductors III-V. The solar simulator is used not only in solar cell research, but also in photoresponsive device testing, surface photovoltage spectroscopy, photocatalysis, photocatalysts, testing and evaluation of liquid crystal substrates, cosmetics, coatings, light-resistance experiments of various materials, inspection and photobiological tests, analysis of surface defects and other areas.
The solar simulator is used to simulate solar equipment. In the photovoltaic sector, it is equipped with electronic loads, equipment for collecting and calculating data, and can be used to test the electrical performance of photovoltaic devices (including several solar cells), such as Pmax, Lmax, Vmax, etc., and the IV curve, among others.

Advantages
1. in accordance with the AAA simulator standards specified by ASTM E927-5, IEC60904-9 2007 Ed2, JIS C8912;
2. AM1.5G air quality filter to ensure perfect spectral matching;
3. High-precision optical integrator, uniform light emission;
4. Xenon lamp, OSRAM, with low energy degradation rate, stable and reliable performance;
Technical parameters
|
Units |
CEL-AAAS50 |
CEL-AAAS100 |
|
Light size
|
50 mm × 50 mm ( 2 inches × 2 inches ) |
100 mm × 100 mm ( 4 inches × 4 inches ) |
|
Working distance |
120 mm ± 30 |
330 mm ± 50 |
|
Optical power output |
100mW/cm²±20% ( 1 Sol , 1000 W/ m² ) |
100mW/cm²±20% ( 1 Sol , 1000 W/ m² ) |
|
Linearity |
0,01% |
0,01% |
|
Level Spectral Correspondence
|
UM |
UM |
|
Spatial Heterogeneity Classification
|
UM |
UM |
|
Temporal Stability Level
|
UM |
UM |
|
Lighting Surface Irradiance |
0,7-1,2 Sol |
0,7-1,2 Sol |
|
Light Emission Direction |
Horizontal, Vertical, Any Angle |
Horizontal, Vertical, Any Angle |
|
cooling Method |
Ar |
Ar |
