Measuring and control equipment for energy and industry
Power Quality Analyzers, Multifunctional Meters, Transducers, Current Transformers, Position Sensors and Load Optimization Systems — Compliant with IEC 61000-4-30 Class A, IEC 61000-4-7 and MID. Lines SINEAX, LINAX, CENTRAX, SIRAX, KINAX and ENERGYMID.
53Equipment
6Categories
IEC 61000-4-30 Class AReference standard
Energy management
Current transformers, data registers, energy sensors, MID certified meters and measurement transducers for heavy current quantities.
Current transformers
Divided core
SIRAX CT3xx
Split core current transformers
Compact Design with separable core halves, ideal for hard-to-reach installations on cables or buses. Perfect for retrofit, as the primary conductor does not need to be interrupted in the assembly.
Technical details
Primary currents up to 2500 A (larger on request)
Separable core for quick assembly without interrupting power
Break-resistant polycarbonate housing
Flame retardant and self-extinguishing according to UL94 V-0
Lacquering covers for protection against manipulation of connections
Accidental opening protection lock
Wall, cable or rail mount
Product page →
Loofah type
ASK
Bushing type current transformers
For indirect measurement of sinusoidal alternating current — just slide over the primary conductor, eliminating time-consuming wiring. Available in various sizes (ASK 31.3, ASK 412.4, ASK 63.4) for buses and cables.
Technical details
Nominal primary currents from 50 A to 1500 A
Rated secondary current of 1 A or 5 A
Accuracy Class 1
Short-term thermal current Ith: 60 × IN for 1 s
Maximum operating voltage one: 0.72 kV
Insulation test voltage 3 kV RMS, 50 Hz, 1 min
Nominal frequency 50 Hz; Insulation class E (120 °C)
Rated loads of 1.25 VA to 10 VA according to the model
Product page →
Coiled primary
WSK
Current transformers with coiled primer
With 4 screw terminals for indirect sinusoidal AC measurement up to 100 A. The right choice for low currents, where bushing transformers cannot be used.
Technical details
Primary currents from 1 to 100 A (WSK 30 series / WSK 40 / WSK 70.6)
Secondary current of 1 A or 5 A
Rated load of 5 VA (WSK 30) or 10 VA (WSK 40 / 70.6)
Short-term thermal current Ith: 60 × IN for 1 s
Maximum operating voltage one: 0.72 kV
Insulation test voltage 3 kV, 50 Hz, 1 min
Insulation class E (120 °C), nominal frequency 50 Hz
Product page →
RESIDUAL CURRENT
KBU
Split core residual current transformers
Divided core type A transformers that capture very small currents. Combined with equipment SINEAX DM5000, AMx000, CENTRAX CUx000 and LINAX PQx000, allow the monitoring of residual currents and failure in machines and installations.
Technical details
High sensitivity sensor that detects the smallest fault currents
Type A residual current transformer
Separable core for easy and quick assembly
Retrofit without interrupting the power supply
Wide frequency range for flexible use
LACRABLE COVERS FOR PROTECTION AGAINST HANDLING
For monitoring with devices SINEAX, CENTRAX and LINAX
Product page →
Power data loggers · Sensors · MID meters
Data logger
Série U1604 (SU1604)
Modular Adding Station
Modular Data Registration System (Summer with Ethernet and LON) that expands the Energy Control System. Equipable with up to 64 galvanically isolated S0 counter inputs and remote access via TCP/IP.
Technical details
Modular concept, software compatible with adders U1600/1/2/3
Up to 64 galvanically isolated S0 pulse entries (SU1624 modules)
64 calculation channels for power, power and costs
Energy Control Language (ECL) for scheduling evaluations, monitoring and optimization
LON Interface for 64 devices
Ethernet 100 Mbit/s with ECL access via TCP/IP (4 sockets); ECS-LAN via COM network
Three-phase meters with integrated power meter and universal current input, for DIN rail, connectable to common current/voltage transformers and Rogowski coils. They measure RMS AC/DC, min/max averages, frequency, crest factor, harmonics and more.
Technical details
Universal Current Inputs: 1/5 A, 333 mV and Rogowski coil
Harmonic measurements up to 63rd, THD, Ipico/UPICO
DIN or wall mounting, vertical or horizontal position
Product page →
MID meter
ENERGYMID EM2281 … EM2389
MID certified energy meters
MID certified multifunctional power meters that combine maximum functionality with ultra-compact design. Wide range of communication interfaces — from pulse S0 to LoRaWAN — for energy registration in industry, commerce and building management.
Technical details
MID approval, accuracy class B
Versions for 2, 3 and 4 wire systems with 100/110V, 230V and 400V
Direct measurement versions up to 80 A (U228x)
Versions for 1 A and 5 A transformers with freely adjustable factors (U238x)
Ultra-compact Design for DIN rail with integrated interface
Product page →
Measuring transducers for heavy current quantities
Multifunctional
SINEAX DM5S
Programmable universal transducer
Freely programmable universal measuring devices for heavy current systems: Classic high accuracy transducers for monitoring and retrofit in power distribution and industry. uninterrupted measurement in the four quadrants.
Technical details
Class 0.2 network state monitoring
Class 0.5S power measurement with up to 16 tariffs
Universal Quantities: U/I, P/Q/S, F, FP and more
Remote communication via Modbus; analog CC output as per version
Configuration without auxiliary power via CB-Manager
Assisted commissioning: board printing, connection checking, simulation and output adjustment
DIN rail assembly, UL certification
Product page →
Current
SIRAX BT5200
AC current transducer
Transducer for alternating current with a single-phase connection that converts the measured current into proportional analog signals. On-site fast programming by buttons or software and clear reading on LCD display.
Technical details
Single-phase connection (current)
2 configurable, linear or inflection analog outputs: 0/4…20 mA or 0/2…10 V
Basic accuracy of 0.2%
Button programming or CB-Configurator software
LCD Display for clear data reading
Integrated Modbus RTU Interface for remote communication and communication
DIN rail assembly
Product page →
Power rating
SIRAX BT5400
Power transducer
Measures and converts active, apparent and reactive power, phase angle and power factor of single-phase or three-phase AC systems (balanced load or not) in proportional DC signal of current or voltage.
Technical details
Connections: single-phase, three-phase 3 wires and three-phase 4 wires
Measures P, Q, S, Phase Angle and Power Factor
Rated voltage up to 500 V, rated current 1 / 5 A
2 configurable analog outputs: unipolar 0…20 mA / 4…20 mA / 0…10 V or bipolar −20…0…+20 mA / −10…0…+10 V
Button programming or CB-Configurator software
LCD Display and integrated Modbus RTU interface
DIN rail assembly
Product page →
Tap position
SIRAX BT5600
Tap position transducer
Programmable transducer that converts the tap position of transformers into equivalent analog output for RTUs, indicators or registers, from a resistance input corresponding to the TAP position.
Technical details
Programmable input range via PC; Adjustable end range in commissioning
Number of programmable taps from 1 to 100 via software
Front LED Display shows the position of the tap
Electrically isolated double outputs
Programmable Analog Output: −20 to +20 mA DC or −12 to +15 V DC
Galvanic and optical insulation between power, input and outputs
3 and 4 wire measurement with automatic conductor resistance compensation
Product page →
Power analysis
Portable instruments and stationary devices for energy quality analysis according to IEC 61000-4-30 Class A, multifunctional meters and current transformers PQ.
Portable instruments
Energy quality
Dranetz HDPQ PLUS
Visa Series / Guide / Xplorer / Xplorer400
Class A power quality analyzers series with touchscreen, transient register (up to 1 µs) and optional 400 Hz monitoring. Precise measurements according to IEC 61000-4-30 for sinkings, overvoltages, harmonics and transients.
Technical details
IEC 61000-4-30 Class A Certification (Edition 3)
Tests 50/60 Hz and 400 Hz networks (Aviation, Navy, Military)
1 MHz sampling for transients up to 2000 peak
Supraharmonics up to the 127th Order
Power/Energy Analysis Class 0.2S
7" color touchscreen LCD for on-site analysis
Security 1000 V CAT III / 600 V CAT IV
Ethernet for remote control and data download
Dran-View 7 analysis Software included
Product page →
Energy quality
LINAX PQ5000-Mobile
Class A mobile power quality analysis
Class A mobile solution to check power quality and availability, evaluate improvement measures and analyze energy flows, with compliance reports (EN 50160, IEC 61000-2-2/4/12, IEEE 519, GB/T) on the device's website (PQ Easy Report).
Technical details
IEC 61000-4-30 Ed.3 Class A, Metrological Certification Failure Record
Automated compliance assessment (EN 50160, GB/T, IEEE 519, customized)
Automated Evaluation of Harmonic Emissions (DACHZ Ed.3, IEEE519, DTR, IEEE1547)
Current measurement with rogowski coils or chain claws
Operation without additional software via integrated WebGUI
Configuration Manager for up to 20 measurement points
Active energy class 0.2S, reactive energy class 0.5S
Cybersecurity (OT) / Cyberprotection
PQ events: sinkings, elevations, interruptions, RVC, frequency variations
Product page →
Energy quality
LINAX PQ5000MOBCL (Current-Link Multi-PQ)
Portable multi-channel analyzer
Multi-channel portable power quality analyzer and load flow to network level 7 (low voltage): measures up to 9 output circuits simultaneously — an instrument in place of nine — recording all load profiles with full PQ analysis per output.
Technical details
Measurement PQ Multichannel IEC 61000-4-30 Ed.3 Class A
Metrological certification METAS according to IEC 62586-2
36 current measurement inputs per device (9 × L1/L2/L3/N)
Safety 600 V CAT IV at current and voltage inputs
Rigid case with IP65 rating when closed
Fault Recorder: RMS values of all voltages and up to 36 currents, with waveform record
Harmonic/Interharmonic Analysis for all currents of each module
Integrated WebGUI as an HMI with Comprehensive Cybersecurity (OT)
Reporting via the web interface (PQ Easy Report)
Product page →
Power Multimeter
METRAHIT ENERGY
Ref.: M249A
TRMS power multimeter and single-phase power quality analyzer with 60,000-digit hand-shaped resolution. Measures consumption of electronics, IT and home appliances in operation and standby, and detects disturbances such as sinking, elevations, transients and harmonics.
Technical details
TRMS multimeter with a resolution of 60,000 digits
Simultaneous current and voltage measurement (AC, AC+DC, DC)
Precise calculation of power and energy, incl. Active and reactive components
PQ analysis: on/undervoltage, sinkings, elevations, transients, harmonics up to the 15th
Data logger with real-time memory for up to 300,000 values
Energy balance according to EU directives 2005/32/EC and 2009/125/EC
DAkkS calibration certificate included, 3 years warranty
Made in Germany
Product page →
Stationary devices
Multifunctional meter
APLUS
Power Monitor with System Analysis
Multifunctional power Monitor with system analysis for measurement, monitoring and power quality analysis. Available as a 96 × 96 mm panel device or for DIN rail (with or without display).
Technical details
Accuracy ±0.1% for current/voltage, ±0.2% for power
Fast response times <100 ms
Configurable measurement times from 2 to 1024 cycles
Bus Interfaces: Modbus RTU, Modbus TCP, Profibus DP
Harmonic Analysis according to IEC 61000-4-7
Disorder Recorder Optional PQ according to IEC 61000-4-30 ed.3
Active/reactive power 0.5S class with load profile storage
Event log with min/max
96 × 96 mm panel or DIN rail versions
Product page →
Multifunctional meter
SINEAX CAM
Universal measuring device
Universal device for heavy current quantities with fast response times and a wide range of network frequency, for electrical distribution systems and industrial installations. Modular Design with optional I/O interface, suitable for heavily distorted networks.
Technical details
Basic accuracy 0.1% (U, I), 0.2% for other quantities
Response times less than 50 ms
Configurable measurement intervals from 1 period
Suitable for phase angle control and distorted waveforms
8 freely configurable analog outputs
Up to 4 configurable I/O terminal groups
Configuration via USB and Modbus (RS485); Modbus TCP/RTU protocols
Min/max registration with time stamp and internal energy meters
DIN rail; External display SINEAX A20 Available
Product page →
Multifunctional meter
SIRAX BM1250
Basic / Advanced / EXPERT VERSIONS
Multifunctional measuring device for network parameters in mono or three-phase systems with 2, 3 or 4 wire connections, to safely monitor the electrical distribution. Large backlit LCD Display in 96 × 96 mm housing.
Technical details
For mono or three-phase networks with 2, 3 or 4-wire connection
96 × 96 mm panel housing with large backlit LCD
Measures voltage, current, power, power and quality parameters
Two optional outputs: pulse, limit, timer or relay
RS485 Interface with Modbus/RTU
Integrated 8 MB Flash Data Logger (events, time and load profile)
User configurable screens: 1–10 of 28 available
Easy installation via Easy Clip or mounting brackets
Three versions: Basic, Advanced, Expert
Product page →
Multifunctional meter
SIRAX BM1400
Programmable heavy current monitoring
Programmable unit for monitoring heavy current with display and LED indication. Offered in 440 V, 5/1 A and 100–250 V AC/DC variants, with optional RS485 or Ethernet communication.
Technical details
Programmable unit for heavy current monitoring
Display with LED indication
Rated voltage 440 V; current inputs 5/1 A
Auxiliary power 100–250 V AC/DC
Variants: Basic, RS485 (Modbus) and Ethernet (ETH)
Configuration via CB-Configurator software
Product page →
Indicator
K21
Multifunctional indicator of network quantities
Multifunctional indicator that measures the essential parameters of an electrical system and clearly displays them on 5 LED displays. 4 quadrant panel meter with energy meters and programmable transformation ratios.
Technical details
Operation in 4 quadrants
Voltage, current, active/reactive/apparent power and FP per phase
Accumulated powers, frequency and cos φ
4 active/reactive power meters, import and export
Accuracy: Class 1 ±1 digit
Min, max and average acquisition with adjustable integration time
Programmable transformation relationships
10 mm LED Displays of good readability
Installation dimensions: 96 × 96 × 80 mm
Product page →
Wireless Sensor
SME 3P / 3PN Radio Modules
Power-Monitor-Energy
SME radio modules that transform a base unit SINEAX AM/DM5000, CENTRAX CU or LINAX PQ into a power plant, collecting additional information on individual distribution and consumption. 3-wire (3P) and 4-wire (3PN) versions with Rogowski coil measurement.
Technical details
Two versions: 3 wires (3P) and 4 wires (3PN)
Maximum current per Rogowski coil: 1200 A
Total harmonic distortion THD i and TDD i per phase
Waveform registration (100/120 values per period)
2.4 GHz radio, range ~10 m from factory
Quick commissioning via QR code registration
Battery power (up to 10 years) or USB-C
Up to 100 currents per SME central; Up to 5 SME systems per location
Product page →
Transformer because
XCTB series
Bushing type current transformers for PQ
Bushing type current transformers for power quality applications, with high precision transmission up to 20 kHz and design for networks with 9 kHz harmonic charge. With conventional 5A output signals, they also serve common 50 Hz applications.
Technical details
For power quality applications up to 20 kHz
Suitable for networks with harmonics up to 9 kHz (base frequency 50/60 Hz)
Secondary output signal from 5 to
High voltage insulation test up to 6 kV
Tested against atmospheric surge for 690V systems according to IEC 61439-1/-2
Primary currents up to 2000 A (greater on request)
Screw-free connection for rigid and flexible conductors
Wall mount, DIN rail or Quick-Fix
Shock and vibration resistant, maintenance-free
Product page →
Residual current management
Residual and fault current monitoring (RCM) with the CENTRAX CU series, SINEAX AM/DM and LINAX PQ — Measurement, programmable PLC and power quality in one equipment.
CENTRAX CU Series
Measurement + PLC
CENTRAX CU3000
Panel 144 × 144 mm
Combines high accuracy measuring instrument for heavy current applications with freely programmable Soft-PLC (CODESYS) on a single panel housing. Optional modules add residual current/ground and temperature monitoring.
Technical details
Soft-PLC CODESYS in 3 performance classes (Basic, Advanced, Professional)
4 current channels and 4 voltage channels with accuracy of 0.1%; 18 kHz sampling
Active energy class 0.2S, reactive class 0.5S
Harmonic Analysis according to IEC 61000-4-7
Disorder Recorder Optional PQ according to IEC 61000-4-30 ed.3
Up to 4 modular extensions: analog outputs, relays, digital inputs, GPS
Optional monitoring of fault current (residual or ground) and temperature (Pt100, PTC)
Security: RBAC, HTTPS, audit log, whitelist, signed firmware
Product page →
Measurement + PLC
CENTRAX CU5000
DIN rail, 160 × 110 × 70 mm
Integrates precision measurement for heavy current with programmable PLC CODESYS in a single unit for DIN rail — often dispensing with separate controller, remote display or data logger. More than 1,500 parameters of status, consumption and power quality.
Technical details
More than 1,500 status, power and power quality parameters
PLC CODESYS in 3 performance classes (Basic, Advanced, PROFESSIONAL)
Active energy class 0.2S, reactive class 0.5S
Freely configurable I/Os and Modbus RTU/TCP interfaces
Condition monitoring: voltages, currents and powers every 10/12 cycles
Load profile storage with minimum float range per range
Optional 16GB Data logger and optional UPS
Optional residual current monitoring via additional module
Connectable to higher level systems at any time
Product page →
Series SINEAX AM / DM5000
Monitoring
SINEAX AM1000
TFT 320 × 240 px Display
Compact instrument for measurement and monitoring in energy distribution systems, with transparent quality and consumption monitoring. Operated via website or color TFT display; Integrated WebServer needs no additional software. Expandable with 2-channel residual current detection module.
Technical details
State monitoring and network imbalance
Harmonic Analysis according to IEC 61000-4-7
Active energy class 0.5S, reactive class 0.5S
Limit monitoring with alarm; I/O of universal process
Optional SME Central: up to 100 currents via radio sensors
Optional 2 channel residual current detection module
Disorder Recorder Optional PQ according to IEC 61000-4-30 ed.3
Color TFT Display 320 × 240 PX and integrated webserver
Cybersecurity (OT) / Cyberprotection
Product page →
Monitoring
SINEAX AM3000
Display TFT 800 × 480 px · Panel 144 × 144 mm
Compact measuring and monitoring instrument that stands out for the quality of the display and intuitive operation via large colored TFT. Integrated webserver for remote acquisition, visualization and analysis without additional software; Residual current via optional module.
Technical details
State monitoring and network imbalance
Harmonic Analysis according to IEC 61000-4-7
Active Energy Class 0.2S, Reactive Class 0.2S (IEC 62053-22/-24)
High resolution color TFT Display 800 × 480 px
Limit monitoring with alarm; I/O of universal process
Optional SME Central: up to 100 currents via radio sensors
Optional 2 channel residual current detection module
Disorder Recorder Optional PQ according to IEC 61000-4-30 ed.3
Browser parameterization; Cybersecurity (OT)
Product page →
Monitoring
SINEAX DM5000
DIN rail · Optional TFT Display
Compact instrument to monitor all aspects of power distribution, with functionality expandable by optional components, including residual current monitoring. Parameterization via webserver or optional TFT display, without additional software.
Technical details
Condition monitoring: voltages, currents and powers every 10/12 cycles
Active energy class 0.2S, reactive class 0.5S
Harmonic analysis according to IEC 61000-4-7 and imbalance assessment
Disorder Recorder Optional PQ according to IEC 61000-4-30 ed.3
Up to 2 modular extensions: analog outputs, relays, digital inputs, GPS
Optional fault current monitoring (residual or ground)
Security: RBAC, HTTPS, audit log, whitelist, signed firmware
Product page →
Series LINAX PQ
S class
LINAX PQ1000
Panel 96 × 96 mm
Stationary device S-Class power quality for panel mounting, combining normative PQ measurement with consumption and condition monitoring. Operated via website or color TFT display; Integrated webserver for remote analysis.
Technical details
IEC 61000-4-30:2015+AMD1:2021 Class S, certified by METAS according to IEC 62586-2
3 channels of current measurement with accuracy of 0.2%
Measurement category 600 V CAT III (voltage), 300 V CAT III (current)
16 GB memory, 18 kHz sampling rate
Active energy Class 0.2S (/5A), reactive class 0.5S
PQDIF format support according to IEEE 1159.3
Reporting via the web interface (PQ Easy Report)
Ethernet (Modbus/TCP, HTTPS, NTP, SFTP, SYSLOG, REST API) and Modbus/RTU
Optional SME switch for up to 100 radio currents
Product page →
Class A
LINAX PQ3000
Panel 144 × 144 mm
Class A stationary power quality for panel mounting. Permanent PQ Evaluation according to IEC 61000-4-30 Ed.3 Class A with compliance reports (EN 50160, IEC 61000-2-2/4/12, IEEE 519, GB/T) created directly on the device's website.
Technical details
IEC 61000-4-30 Ed.3 Class A; Independently certified by METAS according to IEC 62586-2
Panel 144 × 144 mm with color TFT 800 × 480 px
PQ events: sinks, elevations, interruptions, RVC, current elevation, frequency variation
PQDIF format support according to IEEE 1159.3
Active energy class 0.2S, reactive class 0.5S
Reporting via the web interface (PQ Easy Report)
Optional SME Central: up to 100 currents via radio sensors
Options: ±20 mA analog outputs, relays, digital inputs, GPS synchronization
Cybersecurity (OT) / Cyberprotection
Product page →
Class A
LINAX PQ5000
DIN rail · 19" and CL Rack variants
Class A stationary power quality device for DIN rail (also in 19" rack and Current-Link multi-channel variant), combining PQ normative measurement with monitoring of consumption and condition. Compliance reports via PQ Easy Report.
Technical details
IEC 61000-4-30 Ed.3 Class A; Certified by METAS according to IEC 62586-2
DIN rail assembly; Rack and CL multichannel variants available
Event record up to 6 sec for samples and 3 min for RMS values
PQDIF format support according to IEEE 1159.3
Active energy class 0.2S, reactive class 0.5S
Color TFT Display 800 × 480 PX and integrated webserver
Options: Analog outputs ±20 mA (4), UPS (5 × 3 minutes)
Optional SME Central: up to 100 currents via radio sensors
Cybersecurity (OT) / Cyberprotection
Product page →
Smart metering
SmartGridBox
Scalable field box system
Scalable SMART metering system in field box for low voltage distribution stations, monitoring power supply and power distribution. Records in real time the state of the network, power flow, quality and availability — delivered assembled and wired.
Technical details
Measurement variants based on SINEAX DM5000, LINAX PQ5000, PQ5000CL or CENTRAX CU5000
Variants with class A power quality measurement
Main current measurement via integrated Rogowski sensors
Optional measurement by feeder with Current-Link or wireless SME sensors
Data Transfer via gateway, LTE or Ethernet router
Combined variant of PV control and measurement (CENTRAX CU5000)
Autonomous control of generation systems with PV controller
Fully assembled and wired in field box
Integrated cyberprotection at field level
Product page →
Load optimization
Load management systems for reducing demand peaks and energy costs. The CENTRAX CU series (ACIMA) also serves load optimization applications.
Load management
U1500
8 to 64 channel optimization system
Optimization system for load management, expandable from 8 to 64 channels. It reduces energy costs by moving the departure of large consumers to cut demand peaks, with a combined trend extrapolation process and minimal production interference. Simultaneously optimizes different media such as electricity and gas.
Technical details
Expandable in steps from 8 to 64 channels (versions U1500A0 / A1 / A2)
Combined process of trend extrapolation with minimal interference in production
Simultaneous optimization of various media, eg electricity and gas
Setpoint management with load profile for 7 days with 96 values each
Inputs: 16, individually switchable 24 VDC or 230 VAC, isolated in two groups
Outputs: 9 relay relay contacts, 250 VAC max. 2nd
Power supply: 230 V AC, 50 Hz, max. 15 VA
Dimensions: 240 × 160 × 60 mm, DIN EN EN 50022 rail mount
Entries for operation feedback; Special programs for optimization of kitchens
3 years warranty, Made in Germany
Product page →
Position sensor technology
Inclinometers and rotation angle transducers KINAX for mobile automation, shipbuilding, mechanical engineering and harsh environments.
Slope management
Inclinometer
KINAX N702
Analog output 4–20 mA
Tilt transmitter with oil-damped pendulum system for precise tilt measurement. magnetorressive Sensor with 4–20 mA analog output; Measurement range, rotation direction and zero point programmable on the device itself.
Technical details
Magnetor Resistive Tilt Sensor
Analog Interface 4–20 mA
Track programming, direction of rotation and zero point on the device
Oil-damped pendulum, shaft without mechanical stop
Robust aluminum housing
IP66 protection
M12 × 1, 5 pole connector
Supplied with mounting plate with 3 fasteners
Product page →
Inclinometer
KINAX N702-SSI
SSI Digital Interface
Tilt transmitter with oil-damped pendulum and SSI digital interface. Based on a magnetic inclinometer, it allows programming the measurement range, direction of rotation and direct zero point in the unit for flexible integration into control systems.
Technical details
Magnetor Resistive Inclinometer
SSI Digital Interface
Track programming, direction of rotation and zero point on the device
Oil-damped pendulum, shaft without mechanical stop
Robust aluminum housing
IP66 protection
M12 × 1, 8-pole connector
Product page →
Inclinometer
KINAX N702 CANopen
Fieldbus CANopen
Programmable measurement transducer for tilt with oil damped pendulum and CANopen fieldbus interface. Surface mounting, transmits absolute tilt values directly to CAN-based automation networks.
Technical details
Oil-damped pendulum tilt transducer
CANopen fieldbus Interface
Measuring range and programmable parameters
Surface mounting device
M12 × 1, 5 pole connector
Supplied with mounting plate with 3 fasteners
Robust aluminum housing
Product page →
Inclinometer
KINAX N702-INOX 1.5M
Stainless Steel · IP68/IP69K
Absolute inclinometer for heavy applications in harsh environments, with an oil-damped pendulum and a fixed 1.5 m handle. Hermetically sealed stainless steel housing, resistant to sea water, cleaning agents and high mechanical stresses.
Resistant to aggressive media like sea water and cleaning agents
Supports high mechanical efforts
Free parameterization via control cable
Oil damped pendulum system
1.5 m cable (other lengths available)
Product page →
Inclinometer
KINAX N702-INOX HART 5 M
HART Interface · IP68
Absolute tilt Sensor for heavy applications in severe environments, with HART interface and 5.0 m fixed cable. Sealed stainless steel housing with IP68 protection, resistant to sea water and cleaning agents.
Resistant to aggressive media like sea water and cleaning agents
Supports high mechanical efforts
Free parameterization via control cable
5 m cable (other lengths available)
Product page →
MEMS inclinometer
KINAX N705-MEMS
0…360° · 4–20 mA
Robust tilt Sensor with MEMS system in compact industrial design, for demanding industrial environments, mobile automation and external use. Output 4–20 mA via M12 connectors and on-site parameterizable measuring range.
Technical details
0…360° measuring range, parameterizable on site
4…20 mA signal output (1×M12 or 2×M12 connector)
Accuracy 0.2°, repeatability 0.1°
Up to 12-bit resolution
Splash and dustproof housing, IP67 protection
Operating temperature from −30 to +70 °C
Shock resistance 50 g, vibration 4 g
Compact and robust industrial housing for harsh environments
Product page →
MEMS inclinometer
KINAX N705-MEMS CANopen
Fieldbus CupOn · IP67
Robust MEMS-based tilt transmitter in industrial design, for reliable tilt angle measurement under high mechanical effort. Communication via CANopen, freely parameterized on-site range — ideal for mobile automation and external applications.
Technical details
CANopen Interface (connection via 1×M12 or 2×M12)
Splash and dustproof housing, IP67 protection
Operating temperature from −30 to +70 °C
Shock resistance 50 g, vibration 4 g
Compact industrial housing resistant to high mechanical stresses
Precise positioning with high measurement accuracy
Free on-site parameterization for fast commissioning
Easy and fast mounting, low installation cost
Product page →
Rotation angle transducers
Angle of rotation
KINAX 2W2
Compact Ø 48 mm · OEM
Compact and programmable rotation angle transducer for installation, with patented capacitive system without contact. Delivery 4–20 mA DC signal independent of load in 2 wire connection; Range, direction, characteristic curve and programmable zero point via PC — no wear, ideal for OEM.
4–20 mA analog output on 2 wires, independent of charge
Angle measuring range: 0…50° or 0…350°
Range, direction of rotation, characteristic, zero point and programmable switching point via PC
Very low starting Torque < 0.001 NCM (with 2 mm shaft)
Axle without mechanical stops, 360° free turn
Compact size of only 48 mm in diameter (OEM)
Simulation of values for testing the measurement chain at the installation
Output characteristic: linear, V or free curve
Serial interface
Product page →
Angle of rotation
KINAX 3W2
Factory calibrated
Factory calibrated rotation angle transducer for installation, with non-contact capacitive sensing. Provides load-independent 0/4–20 mA DC signal and, by analog method, virtually infinite resolution with wear-free operation.
Technical details
Non-contact patented capacitive system, wear-free
Analog method with virtually infinite resolution
4 angled bands: 0…10°, 90°, 180° and 270°
Measurement output: 0/4…20 mA (2/3/4 wires)
Fine zero point and span adjustment
Very low Torque < 0.001 Ncm
Drive shaft in Ø 2 mm and Ø 6 mm
Axle without mechanical stops, infinite rotation
Product page →
Angle of rotation
KINAX WT707
Robust field design
Rotation angle transducer in factory calibrated robust design, with no contact capacitive sensing. 0/4–20 mA DC output independent of load; Mainly used in machinery and shipbuilding manufacturing.
Technical details
Non-contact patented capacitive system, wear-free
Analog method with virtually infinite resolution
Measuring ranges: 0…30°, 0…60°, 0…90°
Measurement output: 0/4–20 mA
2, 3 or 4 wires connection
Fine adjustment of span / zero point via potentiometer
Linear or V characteristic curve
Axis rotates freely — without damage to exceeding the end of the lane
Rugged housing, vibration and shock resistant field unit
Product page →
Angle of rotation
KINAX WT717
Programmable · IP67
Programmable rotation angle transducer in robust design, with non-contact capacitive system. 4–20 mA load independent DC signal; IP67 Housing Ideal for machinery, shipbuilding, transportation, vehicles and chemical industry.
Technical details
Non-contact patented capacitive system, wear-free
Range, direction of rotation, characteristic curve and programmable switching point via PC
Measuring range: 0°–50° or 0°–350°
2-wire technology output (4–20 mA sign)
Simulation of values for testing control and measurement circuits
Zero point and independently adjustable span
Feature: linear, V or free linearization curve
Serial interface
Maximum static shaft load: 1000 N radial, 500 N axial
Robust IP67 field housing, resistant to vibration and shock
Product page →
Angle of rotation
KINAX WT720
Programmable · IP67/IP69K
Programmable axis rotation angle transducer for robust applications, converting the angular position to a proportional and load-independent DC signal. No-contact and maintenance-free capacitive principle — Ideal for mechanical engineering, vehicles and naval applications such as rudder or propeller position.
Technical details
Measuring range and direction of rotation programmable by buttons and switches
Angular range up to 350°
Output 4…20 mA, 2 wires
Zero point and endpoint independently adjustable
Linear and V characteristic curves
Axle can rotate across the range without damage
Plug-in terminals with spring and polarity reversal protection
Standard synchronous flange and flange adapter
Waterproof and dustproof IP67/IP69K
Patented non-contact capacitive method
Product page →
Other measurement and control technologies
Insulation amplifiers, videographic recorders, transducers for temperature and DC quantities, thermocouples and resistance thermometers.
Insulation amplifiers
Isolation
SINEAX TV808-12
CC signal insulator
Insulation amplifier for electrical separation of DC signals, in unipolar/bipolar versions of 2 channels. Processes unipolar, bipolar and live-zero signals with load reinforcement and signal conversion; Variant with 1 input and 2 outputs divides the signal into two isolated outputs.
Technical details
Electrical insulation between inputs, outputs and auxiliary power Prevents distortion by potential transfer
Processes unipolar, bipolar and live-zero CC signals
More than 250 configurable input/output combinations via jumpers
2 channel version or signal duplicator (1 input / 2 outputs)
Load reinforcement and signal conversion option
Power monitoring with green LED
Version in "Intrinsic Security" (with type exam certificate)
Product page →
Isolation
SINEAX TVD825
CC signal duplicator
Insulation amplifier that acts as a DC signal and voltage duplicator. electrically insulates an input DC signal and duplicates it, allowing it to distribute a measurement signal to various non-interaction receiving systems.
Technical details
DC current/voltage duplicator and insulator
Galvanic CC signals isolation
Duplicates a DC input on isolated outputs
Ref.: 172685
Product page →
Videographic Recorders
Recorder
LINAX DR2000
Manipulation proof record
Videographic recorder for handling proof of manipulation data. With universal analog inputs and viewing modes such as curves, cascade and bar chart, it automatically transmits data to superior systems via Ethernet and Modbus TCP/RTU.
Technical details
Up to 20 universal analog inputs
Up to 40 channels (calculations or fieldbus inputs)
6 digital inputs for operating times, key states or synchronization
128 MB internal memory for manipulation-proof storage
Up to 30 freely attributable limit values with monitoring
6 internal relays for alarm transmission
4 optional math channels with formula editor
Ethernet, Modbus TCP/RTU Slave communication
Visualization and configuration via web browser
Unified analysis software
Product page →
Recorder
LINAX DR3000
TFT 7" · FDA 21 CFR Part 11
High-performance video graphics with 7" TFT display up to 20 analog universal inputs or 40 channels via MODBUS. Non-volatile circular Buffer with SD card or flash drive storage; according to FDA 21 CFR Part 11, equivalent to paper registers in legal validity.
Technical details
7" TFT Display
Up to 20 analog universal inputs or 40 channels via MODBUS
Processes digital and frequency inputs
Limits/states issued via relays, digital outputs or buses
Interfaces: RS232, RS485 (MODBUS), Ethernet with WebServer, Profibus DP, PROFINET
Non-volatile internal circular Buffer; SD card and USB flash drive
PC Software for analysis and comparison of various registers
According to FDA 21 CFR Part 11 (data security and legal validity)
Product page →
DC transducers for temperature and quantities
Top seller
SINEAX V604s
Programmable multifunctional transducer
Programmable multifunctional transducer (top seller) for currents, voltages, temperature sensors, remote transducers or potentiometers, for DIN rail. The two inputs can be combined and related to the two outputs — it allows for calculations and monitoring of sensors, eg. predictive maintenance.
Technical details
DC voltage measurement, DC current, temperature (RTD or TC) and resistance
2 inputs (eg sensor redundancy or differential measurement)
2 outputs (U and/or I)
Sensor connection without external jumpers
RS485 Modbus Interface for systems integration
Programmable relay, eg. For limits and alarms
Wide range AC/DC power supply
High quality pluggable screw terminals
Configuration and commissioning via CB-Manager software
Product page →
V604s Family
SINEAX VB604s / VC604s / VQ604s
V604s family variants
Programmable variants of the V604s family for temperature and DC quantities with 2 inputs and 2 outputs: VB604s adds remote-I/o functionality via MODBUS, VC604s is a security value converter with 2 programmable relays and VQ604s offers response times of up to 10 ms.
Technical details
DC voltage measurement, DC current, temperature (RTD, TC) and resistance
2 combinable inputs for sensor calculations and monitoring
2 outputs (U and/or I; VQ604s: 2 current outputs)
VB604s: Remote I/O — Reading all inputs and control of outputs/relay via MODBUS
VC604s: Security converter with 2 freely programmable relays
VQ604s: Response time of up to 10 ms
RS485 Modbus Interface
Wide range AC/DC source
Configuration via CB-Manager software
Product page →
Universal converter
SINEAX V620
Ref.: 162834
Universal converter for mA, V, thermocouple, RTD and Ohm input signals. Configured via DIP keys, with an accuracy of 0.1% — simple and universal signal conversion solution for temperature and DC quantities.
Passive temperature transducer for Pt100 inputs, without electrical insulation, operating at 2 wires without auxiliary power. Offered in several fixed ranges for direct conversion of temperature into a DC signal.
Technical details
Temperature transducer for Pt100 sensors
3-wire sensor connection (3L)
2-wire passive operation, without auxiliary power
No electrical insulation
Fixed ranges: 0…100 °C, 0…150 °C, 0…200 °C, −30…+70 °C, 50…150 °C
Product page →
Thermocouples
GMCtherm 270 … 285, Ex/NEx
Encapsulated thermocouples
Encapsulated thermocouples designed as flexible temperature sensors for difficult-to-reach measuring points and high mechanical demand. Available in standard and EX versions, optionally with integrated 2-wire transducer.