Testing equipment for medical equipment
Analyzers and simulators to ensure electrical safety and the correct functioning of medical devices — in accordance with IEC 60601, IEC 62353 and other international standards. SECULIFE and RIGEL Medical lines.
36Equipment
3Categories
IEC 60601 / 62353Reference Standards
Device Testers
Electrical Safety
RIGEL SafeTest 60
Ref.: M699A
Robust Safety Analyzer for high-volume testing of medical and laboratory equipment without any applied parts (beds, patient elevators, infusion pumps, CPAPs, centrifuges). Interface with color code and touch screen.
Technical Details
- Tests according to IEC 60601, IEC 62353, IEC 61010 and NFPA-99
- Insulation test according to IEC 62353
- Leakage currents: earth leakage Equipment, cabinet/chassis leakage, independent patient tests
- High current and low energy grounding test; Secondary ground alerts
- Manual control of fault conditions
- Point-to-point tests, network voltage measurement and charging current
- Large color display with touchscreen
- Multi-voltage operation: 90–264 V / 48–64 Hz
- Supplied with calibration certificate, claw measurement cable and protective bag
Product page →
Electrical Safety
SECULIFE ST BASE
Ref.: M694A
Instrument with test sequences in compliance with standards for checking the electrical safety of medical devices after repair and in periodic testing (DGUV 3, MPBetreibV). The best-selling safety tester for equipment up to 400 V, with and without plug.
Technical details
- Standards: VDE 0701-0702, IEC/EN 62353 (VDE 0751), IEC/EN 60974-4 (VDE 0544-4)
- Sequences Pre-configured and programmable with automatic evaluation
- Memory for up to 50,000 records (individual sequences and measurements)
- High resolution 4.3" color TFT Display
- IZYTRONIQ reporting Software included
- USB Interface (A/B); export/import via flash drive; remote control possible
- RFID read/write (with SCANBASE Z751E); support for barcode and thermal printer Z721S
- PRCD test (PRCD) Standard, SPE-PRCD, PRCD-S, PRCD-K)
- Compact and impact resistant housing with integrated rubber protector
Product page →
Electrical safety
SECULIFE ST BASE25
Ref.: M694B
Tester with antimicrobial housing and 25 A test, developed for sensitive hygiene areas in medical technology, pharmaceutical and food industry. The 25 A current also allows for type tests.
Technical details
- Standards: VDE 0701-0702, IEC/EN 62353 (VDE 0751)
- 25 A test current for protection conductor test / type test
- Antimicrobial efficacy against bacteria, viruses and fungi
- Measurements: protection conductor resistance, insulation resistance, leakage currents (eg, equipment, contact, patient, part applied — direct/differential/alternative methods), SELV/PELV voltage, PRCD firing time, functional test (U, I, P, S, LF, f), Temperature (Pt100/Pt1000)
- Memory for up to 50,000 records
- 4.3" color TFT Display
- Pre-configured and programmable sequences (free SequenceDesigner on myGMC)
- RFID, Z721S thermal printer, export/import via USB (XML/ETC)
- Possible remote control
Product page →
Electrical safety
SECULIFE ST PRO
Ref.: M694C
Tester effectively Antimicrobial and procedures in compliance with electrical safety standards of medical devices, with 4 mm sockets for applied parts and complete UDI management.
Technical details
- Standards: VDE 0701-0702, IEC/EN 62353 (VDE 0751), IEC/EN 60601, GOST R 62353
- Sequences IEC/DIN EN 60601 and 62353 Pre-configured and programmable
- 4 mm sockets for parts Applied
- Antimicrobial front and housing for sensitive hygiene areas
- Measurements: protection conductor resistance, insulation, leakage currents (eg, equipment, contact, patient, patient auxiliary, part applied), SELV/PELV voltage, PRCD firing time, test functional, temperature (Pt100/Pt1000)
- TFT 4.3" Display; Dual rotary switch, direct keys and softkeys
- Memory for 50,000 records; Complete UDI Management
- USB for barcode/RFID keyboard player/RFID; Bluetooth 2.0 optional; Integration with IZYTRONIQ
- IZYTRONIQ Business Starter Software included
Product page →

Electrical safety
SECULIFE ST PRIME
Ref.: M694H
Antimicrobial instrument for electrical safety testing of electromedical equipment, including testing High voltage up to 6 kV DC for insulation check in production. Touchscreen and 10-year service guarantee.
Technical details
- High voltage test up to 6 kV DC
- Standards: IEC 60601-1, IEC/EN 62353, DIN VDE 0701 (EN 50678) / 0702 (EN 50699), IEC/EN 60974-4, IEC 62911/62368; IEC 61010 and IEC 60335 via Optional firmware (KA03)
- Protection conductor test: 200 mA AC/DC and 25 A AC
- 10 4 mm configurable terminals for applied parts With switching function
- Leakage currents: protective conductor, contact, equipment, patient, part applied (direct, differential and alternative methods)
- 4.3" color TFT Display with touchscreen; USB ports
- Memory for up to 50,000 objects; remote control via PC (IZYTRONIQ); Bluetooth Optional
- Protection class I (EN 61140); Measurement category 300 V CAT II
- Delivered with IZYTRONIQ Business Professional and Calibration Certificate DAkkS
Product Page →
Multimeters
Multimeter
SECULIFE HIT AM
Ref.: M687A
TRMS System Multimeter for Medical Technology with Housing, Cables and Antimicrobial Rubber Holsters. Made in Germany, ideal for testing, training and production.
Technical details
- 23 functions, incl. Voltage, capacitance, resistance, diode test and continuity
- Current measurement with 100 µA auto-range (resolution 10 nA) up to 10 A (16 A)
- TRMS AC and AC+DC, width of 20 kHz band; Low pass filter 1 kHz
- Measurement categories: 600 V CAT III and 300 V CAT IV
- Memory for more than 15,000 measured values
- Bi-directional infrared Interface (38.4 kBd); Optional IR-USB adapter
- IP 65 protection against dust and water; Automatic Lockout Sockets (ABS)
- Supplied with DAkkS Calibration Certificate
Product Page →
Multimeter
SECULIFE HIT MD
Ref.: M687B
TRMS system multimeter for use in medical and hygienic areas sensitive, such as the food and pharmaceutical industries. Modern ergonomics and a wide range of functions.
Technical details
- 23 functions, incl. Voltage, capacitance, resistance, diode test and continuity
- Current measurement with 100 µA auto-range (resolution 10 nA) up to 10 A (16 A)
- TRMS AC and AC+DC, width of 20 kHz band; Low pass filter 1 kHz
- Measurement categories: 600 V CAT III and 300 V CAT IV
- Memory for more than 15,000 measured values
- Bi-directional infrared Interface (38.4 kBd); Optional IR-USB Adapter
- Power: Optional wide range battery or source (95–250 V AC)
- IP 65; automatic locking sockets; Separate battery and fuse compartments
- Supplied with DAkkS calibration certificate
Product page →
Portable measurement technology
Portable
RIGEL 62353 Plus
Ref.: M699C
Compact Portable Electrical Safety Analyzer of the Rigel Medical Line for Electromedical Device Testing according to IEC/EN 62353 (Tests in Service, After Repair and Periodicals). Ideal for technical assistance in the field.
Technical details
- Electrical safety test according to IEC/EN 62353
- Hand format (handheld), portable
- Documentation: Operation manual, technical sheet, CE certificate and quick guide available
Product page →
Portable
RIGEL 288 Plus
Ref.: M699B
Electric handheld safety analyzer combining tests according to IEC/EN 62353 and IEC/EN 60601 in a portable battery powered instrument for biomedical engineers in routine and post-repair tests in the field.
Technical details
- Electrical safety test according to IEC/EN 62353 and IEC/EN 60601
- Handheld format (handheld), battery powered
- Documentation: Operation Manual, Technical Data Sheet, CE Certificate and Quick Guide Available
Product Page →
Defibrillation
Defibrillation
SECULIFE DF BASE
Ref.: M695Q
External Defibrillator Analyzer. The discharged energy is measured by an integrated load of 50 Ω that simulates the human body; 12-channel ECG with arrhythmias and performance waveforms for defibrillator pulse analysis.
Technical details
- Measurement of single-phase, biphasic and biphasic pulsed energy
- Fully AED compatible, including shock algorithm testing
- Capacity: 5000V, 1000 J
- Integrated 50 Ω load simulating the human body
- 12-channel ECG simulation with arrhythmias and shapes Performance Wave
- Cardioversion Delay Measurement and Load Time Delay Measurement
- Memory for 50 individualized test sequences (self-sequence)
- Full remote control via RS 232; Printer Port Centronics
- 10 universal sockets for patient cables
- 9V battery with charge indicator; Upgradable via Flash
Product Page →
Defibrillation
SECULIFE DF PRO
Ref.: M695R
Intelligent multi-mode analyzer for hand, semi-automatic and automatic defibrillators of the latest generation, with full pulse analysis and Transcutaneous pacemaker analysis.
Technical details
- Compatible with single-phase, biphasic and pulsed waveforms; Compatible with AED
- Capacity: 5000 V, 1000 J
- 26 selectable internal loads (Body simulation load integrated 50 Ω)
- Transcutaneous pacemaker analysis: pulse measurement, period refractory, sensitivity and immunity to interference
- 12-channel ECG simulation with arrhythmias and performance waveforms
- Cardioversion delay measurement; Interference Signals 50/60 Hz
- Graphic display (240 × 64 pixels) with menu selection by menu
- Memory for 50 individualized test sequences
- Centronics port, serial port, oscilloscope output and output High level of ECG
- Defibrillator protection at the pacemaker input
Product page →
Defibrillation
SECULIFE VL
Ref.: M695V
External variable load for SECULIFE DF BASE and DF PRO analyzers. Allows you to adjust the test load from 25 Ω to 200 Ω in 25 Ω steps by turning a button.
Technical details
- External variable load for test defibrillators
- Adjustable from 25 Ω to 200 Ω in steps of 25 Ω
- Adjustment by rotary knob
- RS 232 connection for automatic detection of the selected external load
- Accessory for SECULIFE DF BASE and SECULIFE DF PRO
Product page →
Defibrillation
Rigel UniPulse 400
Ref.: M699R
Compact and robust defibrillator analyzer with full pacemaker functionality. It analyzes all single-phase, biphasic, pattern and pulsating waveforms, displaying results on large color screen.
Technical Details
- Compatible with single-phase, biphasic and pulsed waveforms
- 50 Ω non-inductive test load
- Comprehensive pacemaker function with 5 modes
- 50 variable pacemaker load Ω to 1600 Ω in 50 Ω steps
- ECG simulation with more than 40 selectable arrhythmias and high-level output
- Measures power discharge, load time and cardiac synchronization
- Display Colored LCD with dedicated fast keys
- Large internal memory; USB download for Med-eBase software
- Rechargeable battery for operation without electrical network
Product page →
High frequency surgery (electrosurgery)
HF surgery
SECULIFE ES TECH
Ref.: M695F
High precision TRMS TRMS measurement system for calibration and routine checking of electrosurgical generators, according to IEC 60601. DFA technology digitizes complex HF waveforms at very high speed.
Technical details
- Measurement accuracy of 2%
- Internal loads from 5 to 5500 Ω in 5 Ω steps; External load connection possible
- DFA technology with ultra-fast scanning (sampling rate: 16 million points)
- Industry-standard HF current measurement for multiple pulsed waveforms
- REM/ARM/CQM tests Adjustable at 500 Ω in 1 Ω steps
- Switching between power measurement, leakage current HF and neutral electrode test
- Automated and freely definable test sequences with generator remote control
- Load Curves Power with multiple power adjustments per load
- Real-time operating system with colored touchscreen; 3× USB, RS 232 and Ethernet
- Compatible with Covidien Valleylab ForceTriad, FT10 and LigaSure Generators
Product page →
HF Surgery
SECULIFE ES PRIME
Ref.: M695U
Multi-mode electrosurgery analyzer with a sampling rate of 16 million points, for stable measurement of multi-pulse waveforms of state-of-the-art HF generators.
Technical details
- Measurement accuracy of 1% of the measured value
- TRMS values with DFA technology; Sampling up to 16 million points
- Precision internal loads from 1 to 6400 Ω adjustable in 1 Ω steps; Supported external loads
- Leak current measurement HF and REM/ARM/CQM test adjustable in 1 Ω steps
- Complex waveform analysis of multiple pulses
- Standard range (1000 mV) and low (100 mV) with autoscale; mV ranges, mV peak, mA, crest factor and power (W)
- QVGA colored Touchscreen; Graphic display of the measured RF signal
- Automated sequences and current-power curves; Generator Remote Control
- USB, RS 232 and Ethernet ports; External keyboard and mouse connectors
- Generation of test reports; Optional Tissue Test
Product Page →
Surgery HF
SECULIFE ES PRO
Ref.: M695B
ESU Analyzer with calibration quality for manufacturers and biomedical engineers — the only one in the market with 1% reading uncertainty, using External precision load resistors and broadband current transformer.
Technical details
- 1% reading uncertainty
- TRMS measurements with DFA technology
- External precision load resistors and external broadband current transformer
- Displays mV, mV peak, MA, crest factor and power in Configurable screens
- Capture, storage and printing of waveforms with up to 32,768 points via PC software
- Internal memory for three complete sets of ESU waveforms
- Digital output via USB and RS 232; Optional utility software (Excel graphics)
- Large graphic display with backlight; On-screen waveform with scrolling and zooming
- Customizable load resistors table; Input circuit with internal protection
- The smallest and lightest ESU analyzer in its class
Product page →
Surgery HF
SECULIFE ES XTRA
Ref.: M695C
Complete and autonomous electrosurgery analyzer that establishes a new standard, Combining industry standard RF current measurement with internal precision test loads and automated sequences.
Technical Details
- Industry Standard RF current measurement
- Compatible with continuous and pulsed output waveforms
- Internal precision test loads from 1 to 6400 Ω in 1 Ω steps; Compatible with external loads
- REM/ARM/CQM test with adjustable load of 500 Ω in steps of 1 Ω
- RF leakage current measurement; Capture, storage and printing of waveforms
- Real-time operating system with 1/4 VGA color touchscreen; Up to 15 parameters on configurable screens
- Automated power load curves
- User-definable sequences; automatic or manual activation of the generator; Remote communication with
- 3× USB, RS 232 and Ethernet generators; printing of reports; External keyboard/mouse doors
Product page →
Surgery HF
Rigel Uni-Therm
Ref.: M699M
High Performance Analyzer for Surgical Generators HF: Measures power at high current and performs all high-frequency leak tests according to IEC 60601-2-2, including ESUs with vessel sealing technology.
Technical details
- Three independent resistive load banks (CQM, HF leak and power)
- All high frequency leakage tests according to IEC 60601-2-2
- Power measurement at high current; Tests all ESUs, incl. High current vessel sealing
- High resolution and low induction load bank
- Contact Quality Monitoring Analysis (CQM)
- Simple interface with detailed color screen and help screens
- Integrated automatic generation of test reports
- Test sequences Automated Uni-Therm
Product page →
Infusion
Infusion
SECULIFE IF BASE
Ref.: M695Z
Compact analyzer of single-channel infusion pumps according to IEC 60601 and IEC 62353. Patented design with two stepper motors allows continuous flow monitoring without interruption.
Technical details
- Single channel analyzer; Tests according to IEC 60601 and IEC 62353
- Flow range: 0.1 to 1000 ml/h
- 4.3" color touchscreen with intuitive interface
- Pressure units Configurable: PSI, mmHg, mBar, KPA
- Industrial grade stainless steel pressure sensor
- Dual injection system with two stepper motors for continuous flow measurement
- Internal memory for 250 records with detailed information
- Micro-USB port; Bluetooth Compatible with myBC Mobile App (Android/iOS)
- PDF Reporting via BC Flow for PC Software
Product Page →
Infusion
SECULIFE IF PRO
Ref.: M6960
The most compact fully equipped 4-channel infusion pump analyzer on the market, with manual or automatic tests according to DIN EN 60601-2-24. Interchangeable and calibrable test modules individually.
Technical details
- Multi-channel modular tester; according to DIN EN 60601-2-24 (VDE 0750-2-24)
- 1, 2, 3 and 4 channel models, expandable by the customer on site
- PCA/BOLUS measurement and flow rate
- Back-pressure simulation and occlusion alarm test
- Trumpet curve analysis
- Interchangeable flow modules, calibrating without the base unit
- Automatic test sequences and large internal memory of results
- Data transmission via USB; GMC-I Flow Software Included
- Auxiliary Connection for Nursing Alert
Product Page →
Infusion
SECULIFE IF+
Ref.: M695D
Microprocessor-controlled high-precision infusion pump analyzer. With two volumetric chambers, it simultaneously tests the flow of two volumetric pumps.
Technical details
- Two-camera system for simultaneous testing of two pumps
- Flow range: 0 to 9999 ml/h
- Accuracy: ±1% of the measured flow value
- Execution, calculation and Display of microprocessor-controlled results
- No liquids inside the measuring instrument
- Fluid path without obstacles, easy to clean; Replaceable cables and chambers
- 12 month warranty for materials and manufacturing
- Supplied with Luer Lock tube set and factory calibration certificate
Product page →
Infusion
RIGEL Multi-Flo 1CH
Ref.: M699N
Single-channel version of the Multi-Flo portable analyzer: instant flow measurement, back pressure simulation, occlusion alarm monitoring and bolus/PCA measurement according to IEC 60601-2-24.
Technical details
- Tests according to IEC 60601-2-24
- Flow range: 0.010 to 1500 ml/h
- Flow accuracy ±1% (above 100 µl/h), resolution 10 µl/h
- Pressure measurement range: −500 to +2500 mmHg, accuracy ±10 mmHg
- Back pressure simulation up to 600 mmHg
- Occlusion Alarm Monitoring
- Bolus/PCA measurement from 0.1 to 100 ml; Volume measurement up to 9999 ml
- CE Certificate
Product Page →
Infusion
RIGEL Multi-Flo 2CH
Ref.: M699O
Two-Channel Version of Multi-Flo: Two fully independent channels for testing two infusion pumps simultaneously, doubling the test capacity.
Technical details
- Two fully independent test channels
- Tests according to IEC 60601-2-24
- Flow range: 0.010 to 1500 ml/h per channel
- Flow accuracy ±1% (above 100 µl/h), resolution 10 µl/h
- Pressure range: −500 to +2500 mmHg, accuracy ±10 mmHg
- Simulation of backpressure up to 600 mmHg and occlusion alarm
- Bolus/PCA from 0.1 to 100 ml; Volume up to 9999 ml
- CE Certificate
Product Page →
Infusion
RIGEL Multi-Flo 4CH
Ref.: M699P
Top of the Multi-Flo line with four channels: up to four infusion pumps tested simultaneously and independently for maximum workshop productivity.
Technical Details
- Four fully independent test channels
- Tests according to IEC 60601-2-24
- Flow range: 0.010 to 1500 ml/h per channel
- Flow accuracy ±1% (above 100 µl/h), resolution 10 µl/h
- Pressure range: −500 to +2500 mmHg, accuracy ±10 mmHg
- Back pressure simulation up to 600 mmHg and occlusion alarm
- Bolus/PCA from 0.1 to 100 ml; Volume up to 9999 ml
- CE Certificate
Product Page →
Pressure Measurement
Pressure
SECULIFE DP BASE
Ref.: M695S
Precision digital pressure gauge for positive and negative pressure on compatible liquids and gases. Digitally calibrated, with an accuracy of 0.1% of the total scale.
Technical details
- Range: −13.50 to 100.00 psi (−701 to 5190 mmHg; −374 to 2773 inH₂O; −951 to 7043 cmH₂O at 20 °C)
- Pressure accuracy: ±0.1% of the total scale
- Scales: Psi, inH₂O, cmH₂O, mmHg
- 16-bit measurement with digital calibration and zero adjustment
- Interface for temperature sensor YSI 700 (0.5% FS accuracy)
- Min/Max memory for pressure and temperature
- RS 232 serial Interface
- 5-digit LCD Display with programmable digital filter
- Male luer connector; Measures in liquids and gases
Product page →
Pressure
SECULIFE DP PRO
Ref.: M6950
Configurable precision manometer of high quality for positive and negative pressure in liquids and gases. Excellent accuracy of 0.05% of the total scale.
Technical details
- Pressure accuracy: ±0.05% of the total scale
- 2 selectable measurement channels: 0.3 / 5 / 10 / 75 / 100 PSI
- Units: PSI, mmHg, inHg, cmH₂O, inH₂O, kg/cm², kPa, MBAR, BAR
- 24-bit measurement depth
- Temperature Option: YSI 700 sensor or RTD 100
- Graphic LCD with programmable digital filter
- Digital calibration and zero adjustment
- Quick disconnect connector; Measures in liquids and gases
- Min-Max function and RS 232 port
Product page →
Ultrasound
Ultrasound
SECULIFE UL
Ref.: M695X
Instrument for leakage current in ultrasound systems, Especially for electrical safety testing of TEE probes (transesophageal echocardiography) and diagnostic transducers of all kinds.
Technical details
- Leakage current test range: 0.5 to 500 µA (upper and lower limits)
- 1% accuracy across the range
- Programmable test limits according to manufacturer's specifications
- Tests with IAC Standards/Guidelines for TEE Probes Before Each Use
- Data Protocol with Storage of 99 Test Reports
- Software Utility for PC (Configuration and Remote Control)
- Programmable test voltage and frequency source
- Programmable via flash, updates to the Location
- Printing Results on Optional Printer
- Adapters for the Most Common Ultrasound Systems
Product Page →
Ultrasound
SECULIFE UP
Ref.: M695Y
Ultrasound Wattmeter for measuring and documentation of transducer output power Diagnostics and therapeutics, by the method of force of acoustic radiation with a conical target of 45° in degassed water.
Technical details
- Power measurement range: 0 to 30 W
- Frequency range: 0.5 to 10 MHz
- Resolution: 50 mW (precision balance ±0.15 W)
- Pulsed and continuous power measurement
- Acoustic radiation force method with 45° conical target
- Digital LCD Display, watt reading or grams
- Automatic Zeroing and Stabilization
- Battery and External Source Operation
- Five-Point Certification, Traceable to NIST
- Porta RS 232
Product Page →
ECG · Breathing · Temperature · IBP · SpO₂ · NIBP
Vital Signs
SECULIFE BP PRO
Ref.: M695P
Top-of-the-line model of NIBP simulators for testing patient monitors (top seller). It combines NIBP, IBP, ECG, temperature, arrhythmia, breathing and leak detection in a compact and portable unit.
Technical details
- Simulated parameters: NIBP, IBP, ECG, temperature, arrhythmia, breathing, leak detection
- Pressure accuracy: ±1% of the measured value
- Peak pressure detection with simple reset function
- Synchronized invasive blood pressure reading
- ECG reading with full NSR waveform
- Digital pressure envelope offset
- Multiconnection ports for 2 and 4 mm ECG cables (button pressure or clip)
- Expandable in the field via flash programming
- Small, portable and lightweight; US/EU sources and carrying case included
- Accessories: NIBP AD1–AD5 adapters, FingerSim set, SECULIFE OX1, SECULIFE SP BASE
Product page →
Vital Signs
Rigel Uni-Sim
Ref.: M699F
Hand-powered 6-in-1 Vital Signs Simulator, battery-powered: NIBP, SpO₂, ECG, IBP, temperature and respiration with synchronized tests.
Technical Details
- 6 Synchronized Simulations: NIBP, SpO₂, ECG, IBP, Temperature, Breathing
- Full NIBP simulator functionality: Leak test, overpressure and manometer function
- Simulation of SpO₂: R curves, saturation levels, heart rate, skin color, infusion and artifacts
- Creation and uploading of manufacturer-specific simulation curves
- Bluetooth and USB for Med-eBase software (registrations and test)
- Rechargeable battery for mobile use
- CE certificate; Manual, datasheet and quick guide available
Product page →
ECG · Breathing · Temperature · IBP · SpO₂
Patient Simulator
SECULIFE PS100
Ref.: M695L
Patient Simulator with Microprocessor for Electrocardiograph Tests and Holter, ideal for Generate ECG signals for 12-channel diagnostic systems, monitors and arrhythmia computers.
Technical details
- ECG frequencies: 30, 60, 120 and 240 BPM
- Performance waveforms: sine 10/60/100 Hz, square 0.125/2 Hz, triangular 2 Hz
- High-level output: 1 V P-P; Amplitude tolerance ±2%, frequency ±0.5%
- 10 universal outputs for electrode plugs (2–4 mm), push buttons and clips
- 1 1V signal output for ECG devices without Amplifier
- Integrated Terminals for Continuity Testing (Cable Test)
- Front panel disinfectant wipes
- Power: 9V battery with low battery indicator
- Supplied with manual, transport case and battery
Product page →
Patient simulator
SECULIFE PS200
Ref.: M695M
Portable multiparameter simulator for testing routine of electrocardiographs, patient monitors and arrhythmia systems: ECG with 49 arrhythmias, blood pressure, breathing and temperature, with optional SpO₂.
Technical details
- ECG: 30, 60, 80, 120, 180, 240 and 300 BPM; 49 arrhythmias; Amplitude Tolerance ±1%
- Waveforms: Sine 0.1–100 Hz, square 0.125/2 Hz, triangular 2 Hz; High-level output 1 V p-p
- Breathing: apnea, 15, 20, 30, 40, 60, 80, 100, 120 BrPM
- Static blood pressure: 0, 20, 40, 80, 100, 200, 250, 300 mmHg
- Temperature: 30, 37, 40 °C (YSI 400 and 700)
- SpO₂ Optional: 30–300 BPM; 80, 90 and 97%
- 10 universal connections for patient cables + 1V output; Mini DIN connector for pressure cables
- Self-sequences for BPM, static pressure and performance; Graphic display with status
- Remote control via RS 232; Programmable via Flash
- Power: 9V battery or external source, with battery indicator
Product page →
Patient simulator
Rigel PatSim 200
Ref.: M699H
Compact and lightweight patient simulator for quick and accurate monitor testing: 12-lead ECG with a wide range of arrhythmias, waveforms of performance and pacemakers, in addition to breathing, temperature, PPI and fetal/maternal signs.
Technical details
- Complete 12-lead ECG with independent outputs per lead
- Arrhythmias incl. AV blocks, left/right branch block and atrial conduction patterns
- Performance waveform, pacemaker and fetal/maternal
- Respiration: 0, 5, 10, 15, 30, 40, 60, 80, 120, 180 BRPM
- 2 channel IBP; Static values from −10 to 400 mmHg (dynamic simulation available)
- Temperature simulation; Compatible with legacy IBP and Temperature Cables
- Universal ECG pins for the widest possible variety of test cables
- Li-Ion rechargeable battery, up to 6 hours of operation
- CE certificate; Multilingual Technical Data Sheets
Product Page →

Patient Simulator
SECULIFE PS300
Ref.: M695N
One of the most versatile portable multiparameter simulators on the market, with two graphic displays to view and edit all parameters. Optional: SpO₂, fetal/maternal signs and cardiac output.
Technical details
- ECG: 17 frequencies from 30 to 300 BPM; 49 arrhythmias; amplitude tolerance ±1%; High-level output 1 V p-p
- Waveforms: sine 0.1–100 Hz, square 0.125/2 Hz, triangular 2/2.5 Hz, have-triangular 30–250 BPM
- Breathing: apnea, 15, 20, 30, 40, 60, 80, 100, 120 BPM
- Static blood pressure: −10 to 400 mmHg (17 values)
- Temperature: 0, 24, 30, 37, 40 °C (YSI 400 and 700)
- Optional: SpO₂ (30–300 BPM; 80/90/97%), fetal/maternal simulation, cardiac output
- 10 universal outputs for electrodes (2–4 mm), buttons and clips; Mini DIN terminals for pressure
- Two graphic displays; self-sequences for BPM, static pressure and performance
- Remote control via RS 232; Programmable via Flash in the field
- Power: 9V battery or external source; Suitcase, 2 batteries and US/EU fonts included
Product page →
SpO₂
SECULIFE SP BASE
Ref.: M696B
SpO₂ Digital Simulator with 2.4" color touchscreen and menu Intuitive. Various factory presets for quick test of SpO₂ monitors, plus manual mode for individual parameter control.
Technical details
- 6 oxygen saturation levels from 80 to 99%, accuracy of 2%
- Heart Rates from 30 to 240 BPM (10 selectable values), 1% accuracy
- 3 Adjustable perfusion index values
- Pulse Synchronized with SECULIFE PS 100–300 instruments and SECULIFE BP PRO
- 2.4" colored touchscreen; Operation in preset or manual mode
- Small, portable, light and robust; Network independent battery operation
- USB communication cable and included charging accessories
- Supplied with bag, briefcase, 2 batteries and factory calibration certificate
Product page →
SpO₂
Rigel Puls-R
Ref.: M699J
Universal finger simulator for SpO₂ that replicates the optical characteristics of a human finger, for functional testing of sensors and pulse oximetry monitors, in conjunction with the Rigel UNI-SIM or SP-SIM simulators.
Technical details
- Universal finger simulator for oximetry sensors and monitors
- SpO₂ simulation with 1% resolution, up to 30% saturation (according to monitor capacity)
- R Curves Standard: Nellcor, Nellcor Oximax, Masimo, Philips/HP, Mindray, GE Tuffsat, Nihon Kohden, Nonin, Novametrix, Criticare, Beijing Choice
- Configurable with client-specific R curves via configuration tool
- Status LEDs confirm correct sensor positioning
- Complementary accessory to Simulators Rigel UNI-SIM / SP-SIM
- Technical Data Sheet and Quick Guide Available in the Downloads Area
Product Page →