N2 Series Cold Gas Supply System 855
A LabSolutions offers N2 cold gas supply systems. Nitrogen (LN2) is used as a cooling medium and is taken from a low-pressure storage container (max. 300 mbar) and supplied (pumped) by a pipe until it is applied in a cold gas flow.
Operating principle
The pressure above the level of the liquid within the Dewar is generated by heating a small amount of liquid at the bottom of the Dewar. With only 300 mBar of overpressure, cold gas flows smoothly out of the outlet tube. In these systems, a pressureless storage Dewar is used as a reservoir for LN2. At Dewar, our exclusive cold gas pump is mounted. Inside the pump housing, a microprocessor is used to control the various actions, depending on the selected mode. The selection of a specific mode is done by a 16-position switch, also located inside the pump housing. By controlling the pressure at the time of cold gas transport, the flow is controlled and thus any temperature between the ambient and -160 °C can be achieved.
Important:
the supply of cold N2 gas can have application advantages, but it is important to know that it has a much lower heat removal capacity compared to liquid nitrogen.
Any model in series #855 will work without modifications such as:
– independent autonomous unit;
– Directly controlled unit remotely;
(controlled by its existing PID controller, PLC, computer with A/D conversion board, etc.);
– will operate in 24 V, DC or with our power supply (115 V or 230 V);
– A system with almost no installation time required.
– There is no need for a pressurized supply of LN2;
– There is no need for a cryogenic solenoid valve;
– There is no need for additional control instruments.
When LN2 is required, a small overpressure is generated by a small heating element in the LN2, and the liquid flows out of the system like tap water, no spillage, noise, vibrations, etc.
Software

This software works on Windows 98 – 2000 – ME – NT – Vista – W7 – Windows 10 – Windows 11.